IMPORTANT BELT SIZE MEASURING INSTRUCTIONS

Belts are sized by measuring your waist size to the nearest single inch, not a two inch range. We ask that you put a cloth tape through the belt loops of the pants that you would normally wear the belt with, pulling as tightly as you typically pull a belt, and measure to the nearest single inch. From an ideal fit you will have an inch and a half of adjustment in each direction. This is usually enough of an adjustment to cinch down for something heavy on the outside of the belt, or loosen the belt for an in-the-waistband holster.

You can also measure by laying a leather belt out flat on a table, and measure from the inside edge of the buckle away from the hinge to the hole that you currently use (it is important that the inside length of the buckle be included in the measurement,) and as above, measure to the nearest single inch.